Author Topic: What Are Your Latest Mustang Mods ??? (Read 50019 times)

TripBlkCobra · « **Reply #450 on:** July 31, 2012, 08:11 PM »

Very nice Bossman!! I as well dropped my car off at the shop today to get the new tuning software in, the Preditor screwed me one to many times. Using the Diablo Intune system now. Then I as well have to get on fixing the 8.8 pumpkin and install the new girdle... And maybe even get the full tilt boogie racing IRS bushing kit in. All should be done for Props and Ponies if i find the time... Also ordered some new tires today!! Lol

germeezy1 · « **Reply #451 on:** July 31, 2012, 08:56 PM »

I would love to be posting in this thread so I guess it's time for me to find something to modify.

Kitsunechild · « **Reply #452 on:** August 01, 2012, 11:50 AM »

Quote from: germeezy1 on July 31, 2012, 08:56 PM

I would love to be posting in this thread so I guess it's time for me to find something to modify.

I second that motion... If things fall through with the Windstar Intake, I'm going to have some serious cash to blow~ Haha (Though I'm hoping I can make the deadline. Saving is going pretty good right now. Though it really could be going faster. >.<º I'm getting nervous...)

Badass02GT · « **Reply #453 on:** August 01, 2012, 12:38 PM »

I have some new blingy things coming and I just secured access to a waterjet as well as other fabbing equipment!!! Much more coming soon!!!!

Sent from my MB860 using Tapatalk 2

Boss Man · « **Reply #454 on:** August 01, 2012, 01:03 PM »

At this point, I should probably just start a build thread

Another new addition to our creamsicle colored RPM Stang...

Just needs some flat black RPM logos

TripBlkCobra · « **Reply #455 on:** August 01, 2012, 07:25 PM »

Quote from: Badass02GT on August 01, 2012, 12:38 PM

I have some new blingy things coming and I just secured access to a waterjet as well as other fabbing equipment!!! Much more coming soon!!!!

Sent from my MB860 using Tapatalk 2

Nice... looking forward to seeing some.

Bossman... saw that on FB today on their page...Knew they were yours..haha Looks great.

I was down in Bellingham today as a matter of fact...at discount tire picking up these.

Can't wait to see if I made the right choice of sizing once they are on the car.

Boss Man · « **Reply #456 on:** August 01, 2012, 09:59 PM »

Quote from: TripBlkCobra on August 01, 2012, 07:25 PM

I was down in Bellingham today as a matter of fact...at discount tire picking up these.

B'ham is only 45 minutes from my house! If I knew you were coming south, I'd have made my way up there to say hello.

TripBlkCobra · « **Reply #457 on:** August 01, 2012, 10:05 PM »

Quote from: Boss Man on August 01, 2012, 09:59 PM

Quote from: TripBlkCobra on August 01, 2012, 07:25 PM
I was down in Bellingham today as a matter of fact...at discount tire picking up these.

B'ham is only 45 minutes from my house! If I knew you were coming south, I'd have made my way up there to say hello.

I didn't even know till 5 mins before I went! Lol

germeezy1 · « **Reply #458 on:** August 01, 2012, 11:51 PM »

Did you have the Nitto Invo's installed today?

Boss Man · « **Reply #459 on:** August 02, 2012, 12:12 AM »

Quote from: Boss Man on July 29, 2012, 01:12 PM

RPM Mustang mods (partial list)
1. New stage 3 n/a cams with special high rpm grind
2. 4:10 gears (was 3:73)
3. Torsen T2R differential
4. One piece carbon fiber driveshaft from DynoTech
5. Some awesome appearance mods to be seen first at the Props N Ponies show on August 18th
6. McLeod Racing RST Clutch
7. McLeod Racing Aluminum Flywheel
8. OEM Ford Slave Cylinder

I ended up ordering an HD aluminum one-piece vs carbon fiber. They want around 2K for those! The aluminum versions can be had for somewhere between $600 - $800.

mramx390 · « **Reply #460 on:** August 02, 2012, 02:52 AM »

Sounds like some great additions Boss Man so post pics after the installation. Maybe you do need a His and Hers build thread ?

Midnight Pony · « **Reply #461 on:** August 02, 2012, 06:55 AM »

Quote from: Boss Man on August 01, 2012, 01:03 PM

At this point, I should probably just start a build thread

Great idea

Ries99 · « **Reply #462 on:** August 02, 2012, 01:59 PM »

I'm jealous of all these mods.. I'm thinking next paycheck I'll have to fork out some cash and buy something new.. Only question is what's cheap enough, yet worthy of buying.. Decisions decisions..

germeezy1 · « **Reply #463 on:** August 02, 2012, 02:28 PM »

Quote from: Ries99 on August 02, 2012, 01:59 PM

I'm jealous of all these mods.. I'm thinking next paycheck I'll have to fork out some cash and buy something new.. Only question is what's cheap enough, yet worthy of buying.. Decisions decisions..

Do you have any HID or LED lighting upgrades on your car?

Dusten · « **Reply #464 on:** August 02, 2012, 04:02 PM »

Quote from: Boss Man on August 02, 2012, 12:12 AM

Quote from: Boss Man on July 29, 2012, 01:12 PM
RPM Mustang mods (partial list)
1. New stage 3 n/a cams with special high rpm grind
2. 4:10 gears (was 3:73)
3. Torsen T2R differential
4. One piece carbon fiber driveshaft from DynoTech
5. Some awesome appearance mods to be seen first at the Props N Ponies show on August 18th
6. McLeod Racing RST Clutch
7. McLeod Racing Aluminum Flywheel
8. OEM Ford Slave Cylinder

I ended up ordering an HD aluminum one-piece vs carbon fiber. They want around 2K for those! The aluminum versions can be had for somewhere between $600 - $800.

I had one built for the L for 550

Info

SHOUTBOX

Author Topic: What Are Your Latest Mustang Mods ??? (Read 50019 times)